Ga door naar hoofdinhoud

Wijzigingen in stap #17

Bewerken voor Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] Once you've confirmed the iMac powers on and functions properly, you can start pullingdisconnect the tabs ondisplay cables and lean the adhesive strips to seal the iMacdisplay forward.
[* black] Begin with stripsRemove the film from the 4L and 4R,4R strips first by reaching in from above and pulling the tabs straight up from the bottom edge of the display.
[* icon_note] Once you've confirmed the iMac powers on and functions properly, you can start pullingdisconnect the tabs ondisplay cables and lean the adhesive strips to seal the iMacdisplay forward.
[* black] Begin with stripsRemove the film from the 4L and 4R,4R strips first by reaching in from above and pulling the tabs straight up from the bottom edge of the display.