Ga door naar hoofdinhoud

Wijzigingen in stap #11

Bewerken voor Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] With allRepeat the previous step for the 4L adhesive strips applied, gently lower the display into place so that the bottom edge is resting in its housing and you can access the internal components from the topstrip.
[* black] EnsureOnce you've applied all the display is sitting flush from both edges ofadhesive strips the iMac.
[* black] Apply a piece of masking tape across the lower edge of the display to act
iMac should look as a hinge and temporarily secureshown in the displayphoto.
[* black] With allRepeat the previous step for the 4L adhesive strips applied, gently lower the display into place so that the bottom edge is resting in its housing and you can access the internal components from the topstrip.
[* black] EnsureOnce you've applied all the display is sitting flush from both edges ofadhesive strips the iMac.
[* black] Apply a piece of masking tape across the lower edge of the display to act
iMac should look as a hinge and temporarily secureshown in the displayphoto.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd