Ga door naar hoofdinhoud

Wijzigingen in stap #10

Bewerken voor Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
[*
black] TakeGrasp the red film pull tab on the 4R adhesive strip labeled 4L and 4R and align them alongpull to remove the backing from the strip.
[* black] Align the strip on
the lowerbottom edge of the display enclosure such that they meet inrear enclosure, directly to the middleright of the middle screw on that edge.
[* black] Once you've comfortably established where they go, removeRun your finger along the film backinglength of the adhesive strip to ensure it is straight and stick strips 4L and 4R in placeunwrinkled, pressing down as you go to adhere the strip to the iMac.
[* icon_note] The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
[*
black] TakeGrasp the red film pull tab on the 4R adhesive strip labeled 4L and 4R and align them alongpull to remove the backing from the strip.
[* black] Align the strip on
the lowerbottom edge of the display enclosure such that they meet inrear enclosure, directly to the middleright of the middle screw on that edge.
[* black] Once you've comfortably established where they go, removeRun your finger along the film backinglength of the adhesive strip to ensure it is straight and stick strips 4L and 4R in placeunwrinkled, pressing down as you go to adhere the strip to the iMac.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd