Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Before you start placing strips, remove all of the old adhesive around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
[* [* black] Use a pairPeel off the old strips of adhesive using tweezers to graspor your fingers. Start at the bottom and peel up each strip of adhesive—or if necessary, use a spudger to scrape up''upward'' towards the adhesive, and peel with your fingers.
[* icon_reminder] Repeat this process as necessary to remove all
top of the old adhesivedevice.
[* black] For best results, afterAfter all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
[* black] This helps prep the surface so that theicon_caution] '''Don't skip this step''', or your new adhesive bonds properly (and yourstrips may not bond properly, and the display won'tmay fall out)out of your iMac.
[* [* black] Use a pairPeel off the old strips of adhesive using tweezers to graspor your fingers. Start at the bottom and peel up each strip of adhesive—or if necessary, use a spudger to scrape up''upward'' towards the adhesive, and peel with your fingers.
[* icon_reminder] Repeat this process as necessary to remove all
top of the old adhesivedevice.
[* black] For best results, afterAfter all the old adhesive is removed, carefully clean the area under the adhesive with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
[* black] This helps prep the surface so that theicon_caution] '''Don't skip this step''', or your new adhesive bonds properly (and yourstrips may not bond properly, and the display won'tmay fall out)out of your iMac.