Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Before you start placing strips, it is recommended to remove all of the old adhesive around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

[* black] Use a pair of tweezers to grasp and peel anup the edge of theeach adhesive located around the rear enclosure's perimeter.
[*
strip.
[*
icon_reminder] Repeat this process as necessary to remove all of the old adhesive adhered to the perimeter of the rear enclosure.
[*
adhesive.
[*
icon_note] If necessary, use a spudger to scrape up the remaining adhesive, then peel with your fingers.
[* icon_caution] Before you start placing strips, it is recommended to remove all of the old adhesive around the perimeter of the rear enclosure.
[* black] If you are re-using your existing display, you must also remove the old adhesive from the back of the display.

[* black] Use a pair of tweezers to grasp and peel anup the edge of theeach adhesive located around the rear enclosure's perimeter.
[*
strip.
[*
icon_reminder] Repeat this process as necessary to remove all of the old adhesive adhered to the perimeter of the rear enclosure.
[*
adhesive.
[*
icon_note] If necessary, use a spudger to scrape up the remaining adhesive, then peel with your fingers.