Ga door naar hoofdinhoud

Wijzigingen aan stap #20

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

-[* black] Continue peeling up the tape over the speaker ribbon cables until there is enough slack in the left speaker cable to disconnect it.
- [* icon_note] Do not completely remove this tape—it will be easier to replace if you leave a section still attached to the rear case.
+[* black] Continue peeling up the tape away until there is enough slack in the left speaker cable to disconnect it.
+ [* icon_reminder] Do not completely remove the tape—it will be easier to replace if you leave a section still attached to the rear case.