Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door iRobot

Bewerking goedgekeurd door Jasper Fleischhauer

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mm 5-point Pentalobe screws
[* black] The special screwdriver needed to remove the teneight 5-point Pentalobe screws can be found [product|IF145-090|here].
[* black] The special screwdriver needed to remove the teneight 5-point Pentalobe screws can be found [product|IF145-090|here].