Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door steve

Bewerking goedgekeurd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to free the adhesive loop securing to the I/O board power cable to the upper case.
[* black] Use the flat end of a spudger to free the adhesive loop securing to the I/O board power cable to the upper case.
[* black] Disconnect the I/O board by pulling the power cable away from its socket on the logic board.
[* icon_note] Pull the cable parallel to the face of the logic board toward the front edge of the Air.