Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wijzigingen aan stap #6

Bewerking door Tim

Bewerking geweigerd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[title] Removing the battery connector bracket screws
[* black] Remove the following Phillips screws from the battery connector bracket:
[* red] One 2.2 mm screw
[* orange] One 3.2 mm screw
[* icon_caution] Make sure you don't mix up the screws. It's essential to ensure that all screws are returned to their respective holes to avoid permanent damage to the logic board.