Wijzigingen in deze stap
Bewerken voor Scott Dingle —
Bewerking goedgekeurd door Scott Dingle
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* icon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the current orientation so the fans will not run at full speed. If you have multiple pins on your replacement hard drive, put the connector closest to the SATA connections and closest to the PCB board. |
|---|---|
| [* black] Disconnect the hard drive thermal sensor cable from the hard drive. |