Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door jth208

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Rotate the computer 90 degrees clockwise so the ports face you.
[* red] Remove the three 3 mm Phillips screws along the edge of the lower case.
[* icon_note] When replacing these screws, you must install them in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer. Also, be careful not to put the screws in the two holes (ie, on either side of the video out port).
[* icon_note] When replacing these screws, you must install them in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer. Also, be careful not to put the screws in the two holes (ie, on either side of the video out port).