Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Brett Hartt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

+[title] Adding New Oil
[* black] Insert the nozzle of a funnel into the primary chain inspection hole.
[* black] Pouring slowly, pour approximately 1 qt of oil into the transmission.
[* black] As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.
+ [* icon_note] This may require less than the entire quart of oil.