Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Brett Hartt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[title] Installing the Transmission Drain Plug
[* black] Re-insert the transmission drain plug into the transmission housing and hand tighten.
[* black] Using a 3/4" wrench, tighten down the transmission drain plug.
- [* icon_note] It is important to not over-tighten the drain plug. Tightening the plug too much can cause the threads on the aluminum housing to strip. The plug should be tight, but not too tight. The correct torque specification is 14-21 Foot-lbs
+ [* icon_note] It is important to not over-tighten the drain plug. Tightening the plug too much can strip the threads on the aluminum housing. The plug should be tight, but not too tight. The correct torque specification is 14 - 21 ft-lbs (168 - 252 in-lbs).