Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door Brett Hartt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

+[title] Installing the Transmission Drain Plug
[* black] Re-insert the transmission drain plug into the transmission housing and hand tighten.
[* black] Using a 3/4" wrench, tighten down the transmission drain plug.
[* icon_note] It is important to not over-tighten the drain plug. Tightening the plug too much can cause the threads on the aluminum housing to strip. The plug should be tight, but not too tight.