| - | [* black] Removing the midframe that housed the motherboard, plus a little ribbon cable on the side that includes the headset button. |
|---|
| - | [* black] Also, there's a slot for the little black nub on the back of the display panel to peek through and slide along that white teflon strip. Looks like a linear potentiometer, which would be used to track IPD position as you adjust the displays. |
|---|
| + | [* black] Next out: the midframe that housed the motherboard, accompanied by the small ribbon cable and the attached headset button. |
|---|
| + | [* black] A closer look at the midframe reveals a slot for the little black nub on the rear of the display panel. |
|---|
| + | [* icon_note] This slot allows the nub to peek through and slide along that white Teflon strip. This ''looks'' like a linear [https://en.wikipedia.org/wiki/Potentiometer|potentiometer], which could be used to track IPD position as you adjust the displays. |
|---|
| + | [* black] Ready to go deeper, we remove a smaller midframe and peel away the rubber light-gasket from around the lenses. |
|---|