Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #7

Bewerking door Josh Calvetti

Bewerking goedgekeurd door Josh Calvetti

Voor
Na
Ongewijzigd

Stap regels

[* black] (A1270) Remove screws holding the board to optical drive.
[* black] (A1270) Remove screws holding the board to optical drive.
[* orange] two 3.8 mm #00 Phillips head screws.
[* icon_note] (A1379) There are similar screws present here, but they only remove the metal shielding plate which gives further access to the USB wires
[* icon_caution] Unfortuantely, you cannot disconnect the drive any further without breaking out a soldering iron.