Skip to main content

Wijzigingen aan stap #36

Bewerking door David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use a pair of wire cutters pliers to remove about an inch of the positive terminal surface mount wire leadslead.
[* black] Bend the wire lead around and through the positive ring terminal on the battery compartment.
[* black] Use your now perfected through-hole soldering skills to solder the wire lead to the battery terminal.
[* black] Cut off any excess wire from the lead.
[* black] Use a pair of wire cutters pliers to remove about an inch of the positive terminal surface mount wire leadslead.
[* black] Bend the wire lead around and through the positive ring terminal on the battery compartment.
[* black] Use your now perfected through-hole soldering skills to solder the wire lead to the battery terminal.
[* black] Cut off any excess wire from the lead.