Ga door naar hoofdinhoud

Wijzigingen in stap #36

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a pair of cuttingwire cutters pliers to remove about an inch of the positive terminal surface mount wire leads.
[* black] Use a pair of cuttingwire cutters pliers to remove about an inch of the positive terminal surface mount wire leads.
[* black] Bend the wire lead around and through the positive ring terminal on the battery compartment.
[* black] Use your now perfected through-hole soldering skills to solder the wire lead to the battery terminal.
[* black] Cut any excess wire from the lead.