Ga door naar hoofdinhoud

Wijzigingen in stap #33

Bewerken voor David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Keeping the battery compartment in your hand with your fingersContinue holding the screws in place, place and set the circuit board ontoon top of the battery compartment, slidingcompartment so that the two screws are fed through the two holes on either side of the speaker in the centerspeaker.
[* icon_note] Make sure that the top of the circuit board (the part that says "Brain Game"'''Brain Game''') lines up with the topside of the battery compartment (the side with three metal rings on the outside, as opposed to two)two.
[* black] Use your fingers to loosely screwHand tighten the two included nuts onto the screws that should now protrude through the circuit boardbattery compartment screws.
[* black] Keeping the battery compartment in your hand with your fingersContinue holding the screws in place, place and set the circuit board ontoon top of the battery compartment, slidingcompartment so that the two screws are fed through the two holes on either side of the speaker in the centerspeaker.
[* icon_note] Make sure that the top of the circuit board (the part that says "Brain Game"'''Brain Game''') lines up with the topside of the battery compartment (the side with three metal rings on the outside, as opposed to two)two.
[* black] Use your fingers to loosely screwHand tighten the two included nuts onto the screws that should now protrude through the circuit boardbattery compartment screws.