Ga door naar hoofdinhoud

Wijzigingen in stap #27

Bewerken voor David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Repeat this process for the positive solder pad.
[* black] After adding solder, your solder padsYou should look like this. If they didn't come out just right, you can always remelt the solder or add moreend up with two smooth, convex domes of solder.
[* black] After adding solder, your solder padsYou should look like this. If they didn't come out just right, you can always remelt the solder or add moreend up with two smooth, convex domes of solder.