Ga door naar hoofdinhoud

Wijzigingen aan stap #20

Bewerking door Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] The next components to install are the LEDs. Light emitting diodes are used in all sorts of electronics to provide bright, different colored lights.
+[* black] The next components to install are the LEDs. Light Emitting Diodes are used in all sorts of electronics to provide bright, different colored lights.
[* icon_note] Note that the two leads are different lengths. Since an LED is a diode, it only allows current to travel in one direction, so it is important to install the correct lead in the correct hole.
[* red] The four LEDs belong in each of the four terminals marked LD1 through LD4.
[* black] When installing the LEDs, insert the shorter of the two leads into the hole next to the flat part of the printed circle.