Ga door naar hoofdinhoud

Wijzigingen aan stap #14

Bewerking door Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* red] Bend the leads of the small red diode and insert it into the terminal marked D1.
+[* red] Bend the leads of the small red diode and insert them into the terminal marked D1.
[* icon_note] Make sure that the cathode (marked by a small black band) lines up with the white stripe on the circuit board.
[* black] Use the same method you used to solder the resistors to the board to install the diode.