Ga door naar hoofdinhoud

Wijzigingen in stap #12

Bewerken voor David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Locate your single yellow/violet/black/gold 47 ohm resistorresistor (47 Ohm).
[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.
[* black] Locate your single yellow/violet/black/gold 47 ohm resistorresistor (47 Ohm).
[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.