Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door David Hodson

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Fish the two yellow/violet/red resistors out of your kit.
- [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 ohm resistance.
+ [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 Ω resistance.
[* red] Install these two resistors into the ***R5*** and ***R6*** terminals on the circuit board.