Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door Jake Devincenzi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Fish the two yellow/violet/red resistors out of your kit.
- [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 Ohm resistance.
-[* red] Install these two resistors into the R5 and R6 terminals on the circuit board.
+ [* icon_note] Consulting our resistor color code chart tells us that these resistors have a 4,700 ohm resistance.
+[* red] Install these two resistors into the ***R5*** and ***R6*** terminals on the circuit board.