Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door David Hodson

Wachtend op goedkeuring


Stap regels

+[* black] We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).
[* black] Bend the leads of the resistor to 90^^o^^ angles about 1.5 mm away from the body of the resistor.
[* black] Place the leads of the resistor through the holes marked R1 on the circuit board.
[* black] Turn the board over so that the copper leads are facing up and the resistor leads are pointing straight up in the air.