Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Ken

Bewerking goedgekeurd door Ken

Voor
Na
Ongewijzigd

Stap regels

[title] Prep for repair
[* black] After cleaning up the board and reseating new socket I simply resoldered in place. Now with the new socket installed, I needed to connect the unsoldered lead to the data port on board.
[* icon_note] To find where the trace/lead went to I went to the Internet to find where it connected. I found many usable images to determine the path.
[* black] To remove the coating on the board where I needed to solder , I scrapped away the coating with an Xacto knife.