Wijzigingen aan stap #4
Bewerken voor Cameron Twilley —
Bewerking goedgekeurd door Cameron Twilley
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Keeping the barrel of the device pointing to the left, remove the 14 10mm philips head screws from the body of the device. | |
| + | [* icon_note] A screw driver extension may be required to remove some screws. |
| [* yellow] With the device pointing in the same direction, remove the two 5 mm philips head screws from the body of the device. | |
| [* green] With the device pointing in the same direction, remove the two 8 mm philips head screws from the body of the device. | |
| [* icon_reminder] Screws vary in length. Be sure to keep track of which screws correspond to the correct holes. |