Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Miroslav Djuric

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] StuffRemove the hard drive rubber side protectors from the drive sides.
[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
[* black] Use your forefinger to hold the ribbon cable in place; separate the drive from the ribbon cable.
[* icon_caution] Make sure the hard drive rubber side bumpers are put back on the drive before reinstalling it. Use the hard drive rubber side bumper installation guide to accomplish this task.
[* black] StuffRemove the hard drive rubber side protectors from the drive sides.
[* black] Use a small iPod opening tool to release the black hinge holding the hard drive ribbon cable.
[* black] Use your forefinger to hold the ribbon cable in place; separate the drive from the ribbon cable.
[* icon_caution] Make sure the hard drive rubber side bumpers are put back on the drive before reinstalling it. Use the hard drive rubber side bumper installation guide to accomplish this task.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd

Afbeelding 2

Geen vorige afbeelding

Toegevoegd