Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #7

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] The display should now be free of the body of the Surface Pro. Lift it up and away from the rest of the device.
[* icon_reminder] Before installing a new display, check it carefully to see if any parts need to be transferred over from the back of the old display to the new display. In particular, you may need to transfer over the [https://d3nevzfk7ii3be.cloudfront.net/igi/4MOXDb4NUGsEsfxN|NTrig board in the corner|new_window=true] by disconnecting the two attached ribbon cables and using heat and gentle prying to carefully separate the glue securing the board.
[* icon_reminder] To replace the adhesive securing the display, carefully remove any old adhesive from both the device and the back of the display. Clean and prep the surface with isopropyl alcohol and a lint-free cloth, swiping the cloth in one direction (not back and forth). Apply a strong double-sided tape, such as 2 mm [product|IF317-072|Tesa 61395].
[* icon_reminder] To replace the adhesive securing the display, carefully remove any old adhesive from both the device and the back of the display. Clean and prep the surface with isopropyl alcohol and a lint-free cloth, swiping the cloth in one direction (not back and forth). Apply a strong double-sided tape, such as 2 mm [product|IF317-072|Tesa 61395].