Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #3

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame.
[* icon_note] If your display is badly cracked, a suction cup may not adhere. It may help to first cover the display with a layer of packing tape. Alternatively, you can superglue your suction cup to the display.
[* black] Insert an opening pick into the gap.
[* [* red] There are tabs on the upper right side and upper left side where it is easier to get a tool under the display.
[*
black] Slide an opening pick around the entiresides and bottom of the display to cut the adhesive. Apply more heat as needed.
[* [* red] There are tabs on the upper right side and upper left side where it is easier to get a tool under the display.
[*
black] Slide an opening pick around the entiresides and bottom of the display to cut the adhesive. Apply more heat as needed.
[* icon_caution] Work carefully—the glass is thin and will crack easily if you try to force it.
[* red][* black] Separate the top edge last. There are tabsantennas on the upper right side and upper left side where it is easierboth sides, so be careful not to getdamage them. If needed, you can use a tool underbit of isopropyl alcohol to help weaken the displayadhesive.
[* red][* black] Separate the top edge last. There are tabsantennas on the upper right side and upper left side where it is easierboth sides, so be careful not to getdamage them. If needed, you can use a tool underbit of isopropyl alcohol to help weaken the displayadhesive.