Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerking door Richard Suovanen

Bewerking goedgekeurd door Richard Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* red] Placeblack] Remove the plastic opening tool underneath the ribbon cable attaching the front-facing camera to the motherboard. Gently lift the ribbon cable upwards releasing the front-facing camera's ribbon cable from the motherboard.
[* blue] Place
following four press-fit connectors with the flat edge of a plastic opening tool underneath the ribbon cable attaching the rear-facingspudger:
[* red] Front-facing
camera to the motherboard. Gently lift the ribbon cable upwards releasing the rear-facing camera's ribbon cable from the motherboard.
[* violet] Place the plastic opening tool underneath the ribbon cable attaching the battery to the motherboard. Gently lift the ribbon cable upwards releasing the battery's ribbon cable from the motherboard.
[*
connector.
[* orange] Rear-facing camera connector.
[* yellow] Battery connector.
[*
green] Place the plastic opening tool underneath the ribbon cable attaching the display to the motherboard. Gently lift the ribbon cable upwards releasing the display's ribbon cable from the motherboardDigitizer connector.
[* red] Placeblack] Remove the plastic opening tool underneath the ribbon cable attaching the front-facing camera to the motherboard. Gently lift the ribbon cable upwards releasing the front-facing camera's ribbon cable from the motherboard.
[* blue] Place
following four press-fit connectors with the flat edge of a plastic opening tool underneath the ribbon cable attaching the rear-facingspudger:
[* red] Front-facing
camera to the motherboard. Gently lift the ribbon cable upwards releasing the rear-facing camera's ribbon cable from the motherboard.
[* violet] Place the plastic opening tool underneath the ribbon cable attaching the battery to the motherboard. Gently lift the ribbon cable upwards releasing the battery's ribbon cable from the motherboard.
[*
connector.
[* orange] Rear-facing camera connector.
[* yellow] Battery connector.
[*
green] Place the plastic opening tool underneath the ribbon cable attaching the display to the motherboard. Gently lift the ribbon cable upwards releasing the display's ribbon cable from the motherboardDigitizer connector.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie