Wijzigingen aan stap #3
Bewerken voor Arthur Shi —
Bewerking goedgekeurd door Arthur Shi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Insert the flat end of a spudger between the SD board and the motherboard. | |
| - | [* black] Run the spudger along the sides of the SD board to free it from the adhesive pad holding it in place. |
| + | [* black] Pry up ***slowly ***to loosen the SD board from the RF shield underneath it. If you pry too quickly, you may tear the shield or break its solder points. |
| + | [* black] Run the spudger along the sides of the SD board to free it from the adhesive holding it in place. |
| [* black] Once completely freed, lift the SD board straight off the motherboard. | |
| - | [* icon_caution] The SD card reader is adhered to the RF shield below it. Avoid ripping the RF shield. |