Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door mikeharms

Bewerking geweigerd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to pry all three AirPort antenna connectors up from their sockets on the AirPort board.
[* icon_reminder] During reinstallation, connect the cable withThe cables have either no stripes to the socket marked CH0, the cable withstripes, one stripe or two stripes. Write down which striped cable goes to CH1, andwhich socket. During reinstallation, reconnect the cable with two stripescables to CH2the same original channels.
[* icon_reminder] During reinstallation, connect the cable withThe cables have either no stripes to the socket marked CH0, the cable withstripes, one stripe or two stripes. Write down which striped cable goes to CH1, andwhich socket. During reinstallation, reconnect the cable with two stripescables to CH2the same original channels.