Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Insert wisdom here.
+[* black] Carefully lift the logic board off the heat sink.
+[* icon_note] If the two components appear stuck together, carefully pry them apart with the flat end of a spudger, being careful not to disturb any surface-mount components on the logic board.
+[* icon_reminder] Make sure to apply a new layer of thermal paste before reattaching the heat sink. Our [guide|744|thermal paste guide] makes it easy.