Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #11

Bewerking door George Kavalaparambil

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

[* black] theThe digitizer and glass are glued to the screen bezel. theThe glass can be removed by heating it with a heat gun until the glue is soft enough to pry up. THIS WILL MOST LIKELY BREAK THE GLASSGLASS.
[* black] theThe digitizer can be replaced by first sliding the chip and flex cable through the trackpad hole and sliding it into the opening providedprovided.
[* black] whenWhen you're ready, remove the strip to uncover the adhesive for the glass and carefully place it on the screen bezel. Place it properly the first time as once it's in place it cannot be movedmoved.
[* black] theThe digitizer and glass are glued to the screen bezel. theThe glass can be removed by heating it with a heat gun until the glue is soft enough to pry up. THIS WILL MOST LIKELY BREAK THE GLASSGLASS.
[* black] theThe digitizer can be replaced by first sliding the chip and flex cable through the trackpad hole and sliding it into the opening providedprovided.
[* black] whenWhen you're ready, remove the strip to uncover the adhesive for the glass and carefully place it on the screen bezel. Place it properly the first time as once it's in place it cannot be movedmoved.