Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door Dieter

Bewerking geweigerd door Jake Devincenzi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the following 3 screws:
[* red] Two 1.51.4 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4." This one has a wider head with a diameter of 2.4mm
[* red] Two 1.51.4 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4." This one has a wider head with a diameter of 2.4mm