Ga door naar hoofdinhoud

Wijzigingen aan stap #12

Bewerking door martijn

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the following 8 screws:
[* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear panel.
[* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera.
[* icon_reminder] Don't forget the small plate securing the camera and the screw
[* yellow] One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.