Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door My BOOMSTICK

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] I TOTALLY MISSED the bit about the white piece the first, second and third times I tried this. We need a better close-up picture here to help during reassembly!
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.