Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Byron Hoefer

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* blackred] Remove the Torx screw that holds the display cable.
[* black] Pull out thinkthick display inverter board by pulling it up and out. Two tabs will be holding it in place, you need to get pass these to pull the board free.
[* blackred] Remove the Torx screw that holds the display cable.
[* black] Pull out thinkthick display inverter board by pulling it up and out. Two tabs will be holding it in place, you need to get pass these to pull the board free.