Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #11

Bewerking door gibby420

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following 8 screws:
[* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic boardshaft to the rear panelballs.
[* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic boardshaft and cameramushroom-head.
[* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic boardshaft to the rear panelballs.
[* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic boardshaft and cameramushroom-head.
[* yellow] One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.
[* black] Note for re-assembly:
[* black] The screw that goes next to the cameramushroom-head (bottom right orange highlighted screw) also has a metal strip that holds the cameramushroom-head in place.
[* black] Remember to put this strip back in place before you insert the 2.3 mm Phillips #00 screws with full thread next to the cameramushroom-head.
[* black] The screw that goes next to the cameramushroom-head (bottom right orange highlighted screw) also has a metal strip that holds the cameramushroom-head in place.
[* black] Remember to put this strip back in place before you insert the 2.3 mm Phillips #00 screws with full thread next to the cameramushroom-head.