Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wijzigingen aan stap #4

Bewerking door Alberto

Bewerking goedgekeurd door Scott Havard

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1". (Cable 1 is for the display)
[* icon_caution] Be careful to insert the spudger from the left, as shown in the picture (UNDER THE RIBBON). If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!
[* icon_note] All connectors except the ribbon connector "3" mentioned in step 7 release upwards.
[* icon_note] All connectors except the ribbon connector "3" mentioned in step 7 release upwards.