Wijzigingen in deze stap
Bewerken voor David Mitchell —
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] On reassembly, the ribbon cable removed in step 6 can present problems. Tape the other cables temporarily our of the way. Make a careful right-angle bend in the ribbon cable close to the connectors. Have a friend hold the display at a right angle to the logic case, with a gap between them. Use a pair of toothpicks to maneuver the ribbon cable into position and then push it (GENTLY!) in place with a toothpick, from that gap. It doesn't go all the way in. Toothpicks are softer than metal, and easier on the cable. |
|---|---|
| + | [* black] On reassembly, the ribbon cable can be difficult. Here is a solution that worked. |
| + | [* black] Tape the other cables temporarily our of the way. |
| + | [* black] Make a gentle right-angle bend in the ribbon cable close to the connectors. |
| + | [* black] Have a friend hold the display at a right angle to the logic case, with a gap between them. |
| + | [* black] Use a pair of toothpicks to maneuver the ribbon cable into position and then push it (GENTLY!) in place with a toothpick, from that gap. It doesn't go all the way in. Toothpicks are softer than metal, and easier on the cable. |