Ga door naar hoofdinhoud

Wijzigingen in stap #9

Bewerken voor Brian

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Pretty much any switch will work here. I used a small enclosure by [http://www.budind.com/view/Plastic+Boxes/Hand-Held+Grabbers+Style+F|BUD Industries] (from [http://www.mouser.com/ProductDetail/Bud-Industries/HH-3492/?qs=blOKVJfDFpANzdK6HD6Mog%3d%3d|Mouser])
[* black] I made 2 holes in some perf board for a couple of tact switches. They have a nice feel to them.
[* black] I've~~I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home|BatchPCB] and will make it available on their market place once I verify that it worksworks.~~
[* black] Update: You can now get a [http://www.batchpcb.com/index.php/Products/65726|PCB] for the enclosure for $4.42 There is a $10 per order set up charge from them so you might also want to order the [http://www.batchpcb.com/index.php/Products/65727|connector PCB] at the same time
.
[* black] I've~~I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home|BatchPCB] and will make it available on their market place once I verify that it worksworks.~~
[* black] Update: You can now get a [http://www.batchpcb.com/index.php/Products/65726|PCB] for the enclosure for $4.42 There is a $10 per order set up charge from them so you might also want to order the [http://www.batchpcb.com/index.php/Products/65727|connector PCB] at the same time
.