Ga door naar hoofdinhoud

Wijzigingen in stap #7

Bewerken voor Brian

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Finishing off the connector with heat shrink and hot glue.
[* black] I first covered the hole with a piece of scotch tape with a slot cut in init. The connector is pushed through and hot glue is applied around the connector so it conforms aroundto the outside of the Kindle.
[* black] I first covered the hole with a piece of scotch tape with a slot cut in init. The connector is pushed through and hot glue is applied around the connector so it conforms aroundto the outside of the Kindle.
[* black] The tape prevents the glue from sticking to the Kindle and allows you to remove the connector.