Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #7

Bewerking door Brian

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Finishing off the connector with heat shrink and hot glue.
[* black] I first covered the hole with a piece of scotch tape with a slot cut in in. The connector is pushed through and hot glue is applied around the connector so it conforms around the outside of the Kindle.
[* black] The tape prevents the glue from sticking to the Kindle and allows you to remove the connector.