Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen in deze stap

Bewerking door Jake Devincenzi

Wachtend op goedkeuring


Stap regels

[* black] Carefully insert a metal spudger between the two metal rails along the edge of the display assembly. Gently rotate the spudger to lift the LCD up from the glass.
[* violet] Alternatively, the display assembly can be released by using a small flat bladed screwdriver through the round holes on the outside of the frame. Pry the frame of the display assembly up by gently twisting the screwdriver in the hole under the folded display frame edge.
[* icon_note] Note when reassembling the small metal tab (Lower left corner on the photo) that fits to the small black post on the glass frame.