Wijzigingen aan stap #7
Stap regels
| [title] Fan bracket/shroud removal | |
| - | [* |
| + | [* icon_note] These instructions are written as you will only replace one fan, but you may want to do these steps to both fans at the same time. |
| [* black] The 2 screws supporting the fan are on the heat sink side of the bracket/shroud, so we remove the bracket first, so we can get to those screws next. | |
| [* black] Remove four screws holding the bracket/shroud to the heat sink. | |
| [* black] Tilt the bracket/shroud out. It may take a little more force than you would like. Thats OK. Try sliding it side-to-side as well. |