Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Shaelyn Thomas

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Unscrew the 3.34mm3.35mm phillips head screw from the left side of the green circuit board using a #00 phillips head screwdriver.
[* red] Unscrew the 3.34mm3.35mm phillips head screw from the left side of the green circuit board using a #00 phillips head screwdriver.
[* icon_caution] Caution: Do not tear the ribbon connecting the circuit board to the body of the camera.
[* blackorange] Use an ipodiPod opening tool to loosen the black ribbon clamp.
[* orangeblue] Remove the ribbon connecting the circuit board from the body of the camera.camera using tweezers.
[* black] *ADD 3 new pictures*
[* blackorange] Use an ipodiPod opening tool to loosen the black ribbon clamp.
[* orangeblue] Remove the ribbon connecting the circuit board from the body of the camera.camera using tweezers.
[* black] *ADD 3 new pictures*