Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in deze stap

Bewerking door Andre Romualdo

Bewerking goedgekeurd door Andre Romualdo

Voor
Na
Ongewijzigd

Stap regels

[* black] Now that you have the display out, let's go ahead and remove the aluminum shield off the motherboard.
[* blackred] Unscrew the single 4mm screw located on the top using a T4 Torx bit.
[* blackred] Unscrew the single 4mm screw located on the top using a T4 Torx bit.
[* black] After screw is out, gently remove the aluminum shield off the motherboard.
[* icon_note] Working on a magnet board is recommended as the screws are small and can be easily misplaced.